Cisco Certified Network Associate (CCNA) Interconnecting Networking Devices Part 2

Interconnecting Cisco Networking Devices

Course Hours: 
Course Type: 
Mentor Supported
  • Description
  • Objectives
  • Outline
  • Materials
  • Certification
  • Approvals
  • System Requirements
  • Watch a Demo

This CCNA 200-105 Interconnecting Cisco Networking Devices Part 2 (ICND2) course prepares for the exam associated with the Cisco Certified Network Associate certification.  This course provides the knowledge and skills required to successfully install, operate, and troubleshoot a small to medium size enterprise branch network. This course covers topics LAN Switching Technologies; IP Routing Technologies; WAN Technologies; ACLs; EIGRP for IPv4, and more.

This course includes access to a hands-on Practice-Lab for 200-105, which will allow candidates to have training in the practical application of the course concepts without having to buy any additional software and will prepare them for success on the certification exam.

Prerequisite(s): Cisco Certified Entry Networking Technician (CCENT) Interconnecting Networking Devices Part 1

By the end of this course, you will be able to:

  • List the steps for small network implementation and security
  • Identify and be able to configure IPv4 routing protocols 
  • Recall EIGRP metrics and WAN technologies
  • Recognize the concepts behind IPv6
  • Identify troubleshooting basics

CCNA Part 2 Module 1
Ethernet LAN Fundamentals

  • Virtual LAN Concepts
  • VLAN and VLAN Trunking Configuration and Verification
  • VLAN Trunking Protocol
  • Spanning Tree Protocol Concepts
  • Rapid STP Concepts
  • Spanning Tree Protocol Implementation
  • Implementing RSTP

CCNA Part 2 Module 2
LAN Troubleshooting

  • Troubleshooting STP
  • STP Convergence
  • Troubleshooting Layer 2 EtherChannel
  • Troubleshooting VLANs and VLAN Trunks
  • VLAN Trunking Protocol
  • VTP Configuration and Verification
  • AAA Authentication
  • DHCP Snooping

CCNA Part 2 Module 3
IPv4 Routing Protocols

  • Comparing Dynamic Routing Protocol Features
  • OSPF Concepts and Operation
  • OSPF Area Design
  • Implementing OSPF for IPv4
  • Implementing Multiarea OSPFv2
  • Understanding EIGRP Concepts
  • EIGRP Operation
  • EIGRP Convergence

CCNA Part 2 Module 4
EIGRP for IPv4 and External BGP

  • Core EIGRP Configuration and Verification
  • EIGRP Metrics, Successors, and Feasible Successors
  • Interfaces Enabled with a Routing Protocol
  • Neighbor Relationships
  • Implementing External BGP
  • BGP Concepts
  • eBGP Configuration and Verification

CCNA Part 2 Module 5
Implementing WANs

  • Implementing Point-to-Point WANs
  • Leased-Line WANs with HDLC
  • Leased-Line WANs with PPP
  • Metro Ethernet
  • Layer 3 Design Using Metro Ethernet
  • Multiprotocol Label Switching (MPLS)
  • Internet Access and Internet VPN Fundamentals
  • GRE Tunnels and DMVPN
  • PPP with Ethernet

CCNA Part 2 Module 6
ACLs and QoS

  • IPv4 Access Control List basics
  • Standard Numbered IPv4 ACLs
  • Practice Applying Standard IP ACLs
  • Extended Numbered IP Access Control Lists
  • Named ACLs and ACL Editing
  • Troubleshooting with IPv4 ACLs
  • Introduction to QoS
  • Classification and Marketing
  • Congestion Management (Queuing)

CCNA Part 2 Module 7
IPv4 Routing and Troubleshooting

  • VLAN Routing with Router 802.1Q Trunks
  • VLAN Routing with Layer 3 Switch SVIs
  • VLAN Routing with Layer 3 Switch Routed Ports
  • FHRP and HSRP Concepts
  • Implementing HSRP
  • Troubleshooting HSRP
  • Problems Between the Host and the Default Router
  • Problems with Routing Packets Between Routers

CCNA Part 2 Module 8

  • Normal IPv6 Operation
  • Troubleshooting IPv6
  • OSPFv3 for IPv6 Concepts
  • OSPFv3 Configuration
  • Implementing EIGRP for IPv6
  • IPv6 Access Control Lists
  • Configuring Standard IPv6 ACLs

CCNA Part 2 Module 9

  • Simple Network Management Protocol
  • IP Service Level Agreement
  • SPAN
  • Cloud Computing Concepts
  • WAN Traffic Paths to Reach Cloud Services
  • Virtual Network Functions and Services
  • SDN and Network Programmability
  • Examples of Network Programmability and SDN
  • Cisco APIC-EM Path Trace ACL Analysis Application

**Outlines are subject to change, as courses and materials are updated.**

Ed4Online is committed to being both environmentally conscious and making it easier for you to study! We’re making your education mobile! All of our textbooks are now provided as eTextbooks. You can access them on your laptop, tablet, or mobile device and can study anytime, anywhere.

The move away from physical books to eTextbooks means you get the latest, most up-to-date version available. This also makes your training more accessible, so you can study anywhere you have your phone or tablet. The best part is that all materials are included in your training cost so there are NO extra fees for books!

Upon successful completion of this course, students will be prepared to sit for the Cisco Certified Network Associate Exam 200-105 ICND2: CCNA certification exam.

**Certification exams are not included in the cost of the course.**

 International Association for Continuing Education and Training (IACET)

Ed4Online has been approved as an Accredited Provider by the International Association for Continuing Education and Training (IACET). In obtaining this accreditation, Ed4Online has demonstrated that it complies with the ANSI/IACET Standard which is recognized internationally as a standard of good practice. As a result of the Accredited Provider status, Ed4Online is authorized to offer IACET CEUs for courses and programs that qualify under the ANSI/IACET Standard.

The Continuing Education Unit (CEU) was created by IACET as a measurement of continuing education. One (1) IACET CEU is equal to ten (10) contact hours of participation in an organized continuing education experience under responsible sponsorship, capable direction, and qualified instruction. Under IACET's care, the IACET CEU has evolved from a quantitative measure to a hallmark of quality training and instruction. For more information on IACET, visit

Internet Connection

  • Broadband or High-Speed - DSL, Cable, and Wireless Connections

*Dial-Up internet connections will result in a diminished online experience. Classroom pages may load slowly and viewing large audio and video files may not be possible.


Hardware Requirements

  • Processor - 2GHz Processor or Higher
  • Memory - 1 GB RAM Minimum Recommended

While our courses are accessible through multiple mobile learning platforms, some courses may include a CD or DVD with the Textbook, so you may need access to a computer with CD-ROM or DVD Drive.


PC Software Requirements

  • Operating Systems - Windows 7 or higher
  • Microsoft Office 2007 or higher. Also, you could use a general Word Processing application to save and open Microsoft Office formats (.doc, .docx, .xls, .xlsx, .ppt, .pptx)
  • Internet Browsers - Google Chrome is highly recommended
    • Cookies MUST be enabled
    • Pop-ups MUST be allowed (Pop-up Blocker disabled)
  • Kindle Reader App is needed for many of our courses (No special equipment needed. This can be downloaded for FREE onto your computer.)
  • PowerPoint Viewer (if you do not have PowerPoint)
  • Adobe PDF Reader
  • QuickTime, Windows Media Player &/or Real Player


MAC Software Requirements

  • Operating Systems - Mac OS x 10 or higher with Windows
  • Mac office programs or a Word Processing application to save and open Microsoft Office formats (.doc, .docx, .xls, .xlsx, .ppt, .pptx)
  • Internet Browsers- Google Chrome is highly recommended
    • Cookies MUST be enabled
    • Pop-ups MUST be allowed (Pop-up Blocker disabled)
  • Kindle Reader App is needed for many of our courses (No special equipment needed. This can be downloaded for FREE onto your computer.)
  • PowerPoint Viewer (if you do not have PowerPoint)
  • Adobe PDF Reader
  • Apple QuickTime Media Player
  • Courses that include a CD-ROM or DVD may require an external drive and Parallels software to view.
School Location: